Click save then close the window and click the start button. If the dropdown box at top left says PS2251-07, your all good, if not then change it to PS2251-07 and leave everything else alone. Click the load button and load the MP.ini file. Verify that the "Current Settings" display at the top reads VID*PID: 13FE * 5500, if so or even if not, click the settings button and leave the basic setting new setting options as is. If not, try other USB ports until you find one that works. You should see one of the numbered slots turn green and display some information about your device. Run MPALL_F1_7F00_DL07_v503_0A.exe and plug your drive in and click the update button. Ok, download v5.03.0A-DL07 of MPALL at the link posted above and extract it. If you get an error, it's most likely because you have the device plugged into a USB 2.X port, you can either plug the device into a USB 3.0 port and try again or if you don't have USB 3.0 ports, go back into settings and change the "Host Port" setting to USB 2.0, click save, close the window and try again.
0 kommentar(er)
